|
BTOrcBOAT
|
|
| Home |
WaveChopper30 |
WaveChopper30 pictures |
TurboChopper30 |
Buy |
Shipping fee |
Selling on RCU |
Selling on eBay |
eBay feedback rating |
Exchange rate |
PayPal |
Contact us |
Some idea on building WaveChopper30. Please set the center of gravity to 185mm from the transom end. This value is a suggestion but by no means best.
Placing the radio box in the front is not an advantage. Because the pipe header bend to the right, interfered the rudder push rod.
The radio box was later moved to the rear. Side way hole then opened for the rudder push rod.
CAD and drawing do help model boat building. Download ProgeCAD LT(or newer version) from http://www.download.com/. It is a free CAD. Good enough for model boat building. You can, on the screen, see how your boat eventually would be. Can print 1:1 drawing. Drill holes in plywood board first. Untill you are satisified with the dimension and accuracy. Then drill holes on the boat. Reduce the chance of drilling incorrect or inaccurate holes in the boat. Repaire is time consuming, buy new cost money. These seems time consuming work actually save time and make you a better boat.
For the 6.35mm hole, the shaft outlet hole. This hole is near the edge. Drilling large hole near the edge easily crack the body. Use small bore drill bit first, say 4mm. Gradually increase the drill bit bore, each time 0.5mm. Lastly use 6.35mm drill bit. These seems time consuming work actually save time and make you a better boat.
Small picture: 640 * 480 pixels, approximately 70KB
Large picture: 2592 * 1944 pixels, approximately 2.2MB
PDRM1188.JPG Small
PDRM1189.JPG Small
PDRM1190.JPG Small
PDRM1191.JPG Small
PDRM1192.JPG Small
PDRM1196.JPG Small
PDRM1197.JPG Small
PDRM1201.JPG Small
PDRM1202.JPG Small
PDRM1217.JPG Small
PDRM1219.JPG Small
PDRM1220.JPG Small
PDRM1221.JPG Small
PDRM1222.JPG Small
PDRM1223.JPG Small
PDRM1228.JPG Small
PDRM1272.JPG Small
PDRM1203.JPG Small
PDRM1204.JPG Small
PDRM1205.JPG Small
PDRM1206.JPG Small
PDRM1208.JPG Small
PDRM1207.JPG Small
PDRM1215.JPG Small
PDRM1216.JPG Small
WC30bptp.gif Small
WC30bptpeg.gif Small
PDRM1209.JPG Small
PDRM1210.JPG Small
PDRM1440.JPG Small
PDRM1213.JPG Small
PDRM1224.JPG Small
PDRM1226.JPG Small
PDRM1273.JPG Small
PDRM1274.JPG Small
PDRM1275.JPG Small
PDRM1276.JPG Small
PDRM1229.JPG Small
PDRM1277.JPG Small
PDRM1279.JPG Small
PDRM1280.JPG Small
PDRM1281.JPG Small
PDRM1282.JPG Small
DSC08702.JPG Small, Large
DSC08710.JPG Small, Large
DSC08728.JPG Small, Large
DSC08730.JPG Small, Large
DSC08733.JPG Small, Large
DSC08738.JPG Small, Large
DSC08743.JPG Small, Large
DSC08745.JPG Small, Large
DSC08752.JPG Small, Large
DSC08761.JPG Small, Large
DSC08762.JPG Small, Large
DSC08771.JPG Small, Large
DSC08773.JPG Small, Large
DSC08781.JPG Small, Large
DSC08784.JPG Small, Large
DSC08797.JPG Small, Large
DSC08803.JPG Small, Large
DSC08809.JPG Small, Large
DSC08814.JPG Small, Large
Video (45MB, large file, right click, use save target as): MOV08690.MPG
|
Designated trademarks and brands are the property of their respective owners.
|
|